 |
 |
 |
 |
 |
 |
Product Features
- The SCR unit attached with high speed fuse in order to prevent the damage of SCR due to the shortage current (di/dt).
- The unit is packaged onstruction with less dimension, easy for installation and wiring.
- The causes of malfuntion can be indicated by individual LED lamp, easy for trouble shooting.
- Less non-linearity output provides accurate control of temperature.
- High quality and high technical productions with no electrical interference.
- Attached with protecting cover, Securities accession.
- Signal terminator adoption Europeanism dissociable form front/top wire inlet type, Change Shih can no tear open signal line.
- Initiation board pick abruption compose, Avertible high voltage detriment host board.
- Have fuse break, main source error, SCR over temperature and alarm contact output.
Operation Enviroment
- Ambient temperature : -10~45°C, Relative humidity, Max 90%.
Installation
- The SCR unit will produce heat itself during operation, please errect it upward according to the instruction.
- The panel must be upward ventilated for hot air. We recommand mounting a ventilating fan in the control panel.
- Do not install the unit in the space with high temperature and poor ventilating, Do not operate the unit exceed 70% of rated output in case of above mentioned poor ambient conditions.
Load Test
- The SCR unit will not well funtioned in case of less output load (0.6 Amp).
Plesae connect the load at least 0.6 Amp.
